| dc.description.abstract | Combat vehicles are exposed to high risks due to their high ground clearance and nature of operation in harsh environments. This requires robust stability controllers to cope with the rapid change and uncertainty of driving conditions on various terrains. Moreover, it is required to enhance vehicle stability and increase safety to reduce accidents’ fatality probability. This research focuses on investigating the effectiveness of different lateral stability controllers and their integration in enhancing the cornering performance of an 8x8 combat vehicle when driving at limited handling conditions.
In this research, a new Active Rear Steering (ARS) stability controller for an 8x8 combat vehicle is introduced. This technique is extensively investigated to show its merits and effectiveness for human and autonomous operation. For human operation, the ARS is developed using Linear Quadratic Regulator (LQR) control method, which is compared with previous techniques. Furthermore, the controller is extended and tested for working in a rough and irregular road profile using a novel adaptive Integral Sliding Mode Controller (ISMC). In the case of autonomous operation, a frequency domain analysis is conducted to show the benefits of considering the steering of the rear axles in the path-following performance at different driving conditions. The study compared two different objectives for the controller; the first is including the steering of the rear axles in the path-following controller, while the second is to integrate it as a stability controller with a front-steering path-following controller.
In addition, this research introduces a novel Differential Braking (DB) controller. The proposed control prevents the excessive use of braking forces and consequently the longitudinal dynamic’s deterioration. Besides, it introduces an effective DB controller with less dependency and sensitivity to the reference yaw model.
Eventually, two various Integrated Chassis Controllers (ICC) are developed and compared. The first is developed by integrating the ISMC-ARS with the DB controller using a fuzzy logic controller. The second ICC integrates the ISMC-ARS with a developed robust Torque Vectoring Controller (TVC). This integration is designed based on a performance map that shows the effective region of each controller using a new technique based on Machine Learning (ML). | en |
