• Login
    View Item 
    •   eScholar Home
    • Faculty of Energy Systems & Nuclear Science
    • Master Theses & Projects
    • View Item
    •   eScholar Home
    • Faculty of Energy Systems & Nuclear Science
    • Master Theses & Projects
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Conceptual design for a re-entrant type fuel channel for supercritical water-cooled nuclear reactors

    Thumbnail
    View/Open
    Samuel_Jeffrey.pdf (4.965Mb)
    Date
    2011-04-01
    Author
    Samuel, Jeffrey
    Metadata
    Show full item record
    Abstract
    Current CANDU-type nuclear reactors use a once-through fuel-channel with an annulus gas insulating it from the moderator. The current reference design for a CANDU-type SuperCritical Water-Cooled Reactor (SCWR) is to eliminate the annulus gap and use a ceramic insert to insulate the coolant from the moderator. While such a design may work, alternative fuel-channel design concepts are under development to explore the optimum efficiency of SCWRs. One such alternative approach is called the Re-Entrant fuel-channel. The Re-Entrant fuel-channel consists of three tubes, the inner tube (flow tube), pressure tube and an outer tube. The fuel bundles are placed in the inner tube. An annulus is formed between the flow and pressure tubes, through which the primary coolant flows. A ceramic insulator is placed between the pressure tube and the outer tube. The coolant flows through the annulus receiving heat from the inner tube from one end of the channel to another. At the far end, the flow will reverse direction and enter the inner tube, and hence the fuel-string. At the inlet, the temperature is 350°C for a high-pressure coolant (pressure of 25 MPa), which is just below the pseudocritical point. At the outlet, the temperature is about 625ºC at the same pressure (the pressure drop is small and can be neglected). The objective of this work was to design the Re-Entrant channel and to estimate the heat loss to the moderator for the proposed new fuel-channel design. A numerical model was developed and MATLAB was used to calculate the heat loss from the insulated Re-Entrant fuel-channel along with the temperature profiles and the heat transfer coefficients for a given set of flow, pressure, temperature and power boundary conditions. Thermophysical properties were obtained from NIST REFPROP software. With the results from the numerical model, the design of the Re-Entrant fuelchannel was optimized to improve its efficiency
    URI
    https://hdl.handle.net/10155/144
    Collections
    • Electronic Theses and Dissertations [1336]
    • Master Theses & Projects [79]

    DSpace software copyright © 2002-2016  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    Atmire NV
     

     

    Browse

    All of eScholarCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    DSpace software copyright © 2002-2016  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    Atmire NV