Search
Now showing items 1-10 of 34
Design and analysis of the three degrees of freedom parallel kinematic machine
(2008-08-01)
The thesis is about design and analysis of a PKM with 3 DOF. The new PKM is designed as a machine tool in various applications in manufacturing. The PKM is optimized based on the developed stiffness model. Kinematics and ...
Design and development of an automated uranium pellet stacking system
(2009-06-01)
A novel design for an automated uranium pellet stacking system is presented. This
system is designed to replace the manual method for stacking uranium pellets for
CANDU fuel bundles that is currently used at Cameco Fuel ...
Energy, exergy and cost analyses of nuclear-based hydrogen production via thermochemical water decomposition using a copper-chlorine (Cu-CI) cycle
(2008-04-01)
In this thesis the Copper-Chlorine (Cu-CI) thermochemical cycle and its components as well as operational and environmental conditions are defined, and a comprehensive thermodynamic analysis of a Cu-CI thermochemical cycle, ...
Analysis of hydrodynamic phenomena in a fluidized bed for thermochemical hydrogen production
(2008-04-01)
This thesis examines transport phenomena of cupric chloride (CuCI2) hydrolysis within a fluidized bed. Conversions of CuCi2 and steam as a fluidizing gas are numerically investigated using a new non-catalytic gas-solid ...
Modeling and vibration analysis of a rocking–mass gyroscope system
(2008-04-01)
Rocking-mass gyroscope consists of an assembly of four cantilever beams with a rigid mass attached to them in the middle subjected to base rotations. Due to the gyroscope effect, the beams undergo coupled flexural-torsional ...
Thermodynamic performance evaluation and experimental study of a Marnoch Heat Engine
(2009-10-01)
The Marnoch Heat Engine (MHE) is a recently patented type of new heat engine that
produces electricity from lower temperature heat sources. The MHE utilizes lower
temperature differences to generate electricity than any ...
Multi-state system in a fault tree analsis of a nuclear based thermochemical hydrogen plant
(2008-07-01)
Nuclear-based hydrogen generation is a promising way to supply hydrogen for this large market in the future. This thesis focuses on one of the most promising methods, a thermochemical Cu-Cl cycle, which is currently under ...
Transient heat transfer analysis of heat exchangers in a Marnoch Heat Engine
(2009-12-01)
The Marnoch heat engine (MHE) is a new type of power generation device that is under research and development at the University of Ontario Institute of Technology. In this thesis, the transient heat transfer behaviour of ...
Design of 3-DOF parallel manipulators for micro-motion applications
(2009-08-01)
This thesis presents two unique micro-motion parallel kinematic manipulators (PKM):
a three degrees of freedom (3-DOF) micro-motion manipulator and a 3-DOF micro-motion
manipulator with actuation redundancy. The 3-DOF ...
Thermal performance analysis and geometrical optimization of automotive brake rotors.
(2008-07-01)
The heat dissipation and thermal performance of ventilated brake discs strongly depends on the aerodynamic characteristics of the air flow through the rotor passages. In this thesis, the thermal convection is analyzed using ...