Search
Now showing items 1-10 of 16
Performance investigation of various cold thermal energy storages
(2008-07-01)
This study deals with solidification and melting of some typical encapsulated ice thermal energy storage geometries. Using ANSYS GAMBIT and FLUENT 6.0 software, HTF fluid motion past encapsulated water (ice) geometries, ...
Enhancing the effectiveness of Stirling engine regenerators
(2019-04-01)
A discrete heat transfer model is developed to determine which parameters influence the effectiveness of Stirling engine regenerators and quantify how they influence it. It is revealed that the regenerator thermal mass ...
Mass transfer and particle dissolution in liquid-gas and solid-liquid flows: Application to hydrogen production processes.
(2013-10-01)
Many environmental problems are related to the production, transformation and use
of energy. Some of the concerns include, but are not limited to, acid rain, ozone depletion
and climate change. Therefore, “greener” ...
Specifics of forced-convection heat transfer to supercritical water flowing upward in annular and bundle flow geometries
(2016-08-01)
Since annulus- and bundle-flow geometries impede coolant flow, heat transfer to the coolant would occur differently than in bare tubes. The main objective of this work is to propose and verity a universal method to accurately ...
Assessment of FLUENT CFD code as an analysis tool for SCW applications
(2012-08-01)
Chosen as one of six Generation‒IV nuclear-reactor concepts, SuperCritical Water-cooled Reactors (SCWRs) are expected to have high thermal efficiencies within the range of 45 ‒ 50% owing to the reactor‟s high pressures and ...
Conceptual design for a re-entrant type fuel channel for supercritical water-cooled nuclear reactors
(2011-04-01)
Current CANDU-type nuclear reactors use a once-through fuel-channel with an annulus gas insulating it from the moderator. The current reference design for a CANDU-type SuperCritical Water-Cooled Reactor (SCWR) is to eliminate ...
Electrohydrodynamic enhancement of extraterrestrial capilliary pumped loops for nuclear applications
(2010-12-01)
This work examines electrohydrodynamic enhancement of capillary pump loops (CPL) for use in extraterrestrial nuclear applications. A capillary pump uses capillary action through a porous wick to transport heat and mass. ...
Study on supercritical fluids in an intermediate heat exchanger for an SCWR hydrogen cogeneration system
(2015-12-01)
SuperCritical Water-cooled Reactors (SCWRs) are one of six Generation-IV nuclear reactor concepts under development worldwide. SCWRs benefit from an increase in thermal efficiency due to the reactor coolant operating above ...
Study on heat transfer to supercritical water in application to SMRs
(2021-12-01)
The SuperSafe Reactor (SSR), a small modular reactor (SMR) concept with a supercritical water coolant, was subjected to a thermalhydraulic analysis and an economic analysis of its Levelized Unit of Energy Cost (LUEC). ...
Second law analysis of a liquid cooled battery thermal management system for hybrid and electric vehicles
(2010-08-01)
As hybrid and electric vehicles continue to evolve there is a need for better battery
thermal management systems (BTMS), which maintain uniformity of operating
temperature of the batteries in the vehicles. This thesis ...