Browsing Faculty of Engineering & Applied Science by Title
Now showing items 441-460 of 619
-
Modeling, analysis, simulation and real-time hardware in-the-loop implementation of hybrid/electric vehicles’ powertrain
(2019-03-01)This thesis investigates modeling, analysis and simulation of propulsion system in HEVs/EVs with particular emphasis on transient modeling. To achieve that, a novel complete simulation model on PSIM platform has been ... -
Modeling, design, control and validation of a multiple-input DC-DC converter topology for effective renewable energy management
(2019-04-01)Multiple-input power converters are receiving significant research attention as they offer several advantages over conventional converters, specifically their ability to interface multiple energy sources of various kinds. ... -
Modeling, simulation, and design of hybrid EV-battery charger for optimum grid utilization
(2020-12-01)The rapid recent development of electric vehicles (EVs) charging system, is changing the future of the transportation sector. Thanks to Photovoltaics solar energy (PV), the EV charging operating cost is reduced, and an ... -
Modelling and prediction of tire-rim slip with finite element analysis
(2023-07-01)In this thesis, tire-rim slip was simulated with a FEA model of a RHD truck tire. Multiple simulations were conducted to validate the model and investigate the effects of different parameters such as terrain type, tire-rim ... -
Modelling and real-time simulation of a modular bidirectional solid-state transformer for ultra-fast charging of electric vehicles
(2021-08-01)This thesis proposes a modular Solid-State Transformer (SST) system architecture to be directly interfacing with a three-phase MV utility network enabling high-power and ultra-fast charging capabilities for electric vehicles, ... -
Modelling and validation of agricultural tire-terrain interaction
(2020-12-01)The use of Finite Element Analysis (FEA) and simulation software has been extensively used for many engineering applications. More precisely, computerized methods have paved way for accurately simulating tire-terrain ... -
Modelling of radioactive particle resuspension after a dirty bomb event
(2023-12-01)The primary hazard of a Dirty Bomb emanates not from the initial detonation but from the subsequent re-suspension of deposited radioactive particles. Although radiological contamination is substantial on surfaces initially, ... -
Modelling, inspection, and post-processing of layer-based additive manufacturing surfaces to maintain product quality
(2017-04-01)Today’s Additive Manufacturing (AM) is mostly layer-based. Despite AM’s great capabilities in fabrication of complex geometries, product’s surface roughness is a limiting factor in many industrial applications. Therefore, ... -
Modified wavelet-based pulse width modulation technique for cascaded H-bridge multilevel converter
(2023-08-01)Power electronics (PE) converters are crucial for providing a cost-effective, reliable, and efficient solutions for integrating renewable energy sources (RES) into the electrical grid. Over the years, many converter ... -
A monitoring framework for side-channel information leaks
(2019-04-01)Security and privacy in computer systems is becoming an ever important field of study as the information available on these systems is of ever increasing value. The state of research on direct security attacks to computer ... -
Monte-Carlo-simulation-based performance analysis of the heat transfer process in nuclear-based hydrogen production based on Cu-Cl Cycle.
(2014-08-01)As a crucial step in nuclear-based hydrogen production based on Cu-Cl cycle, the performance analysis of heat transfer process is of paramount importance. However, as a newly built system, the major obstacle of applying ... -
Motion planning for multi-link robots with artificial potential fields and modified simulated annealing
(2010-12-01)In this thesis we present a hybrid control methodology using Artificial Potential Fields (APF) integrated with a modified Simulated Annealing (SA) optimization algorithm for motion planning of a multi-link robots team. The ... -
Multi-antenna relay network beamforming design for multiuser peer-to-peer communications.
(2014-08-01)In this work, we consider a multi-user peer-to-peer relay network with multiple multiantenna relays which employ amplify-and-forward relaying protocol. Assuming distributed relay beamforming strategy, we investigate the ... -
Multi-dimensional modeling of transient transport phenomena in molten carbonate fuel cells
(2012-06-01)Molten carbonate fuel cells (MCFCs) have become an attractive emerging technology for stationary co-generation of heat and power. From a technical perspective, dynamic operation has a significant effect on the fuel cell ... -
Multi-state system in a fault tree analsis of a nuclear based thermochemical hydrogen plant
(2008-07-01)Nuclear-based hydrogen generation is a promising way to supply hydrogen for this large market in the future. This thesis focuses on one of the most promising methods, a thermochemical Cu-Cl cycle, which is currently under ... -
Multimodal series elastic actuator for human-machine interaction with applications in robot-aided rehabilitation
(2019-11-01)Series elastic actuators (SEAs) are becoming an elemental building block in collaborative robotic systems. They introduce an elastic element between the mechanical drive and the end-effector, making otherwise rigid structures ... -
Multiphase flow and chemical reactor thermodynamics for hydrolysis and thermochemical production
(2012-08-01)Current techniques of hydrogen production (primarily reformation of fossil fuels) are unsustainable, releasing CO2 into the atmosphere, as well as consuming limited reserves of fossil fuels. The copper-chlorine cycle is a ... -
Neutronic characterization of a Molybdenum-99-producing CANDU fuel bundle and implications for reactivity-device worth and refuelling strategies
(2023-08-01)Operating CANDU reactors can potentially produce significant quantities of Molybdenum-99 due to their ability to be refuelled online, high thermal neutron flux and fuel-design flexibility. A Molybdenum-producing bundle ... -
New approaches in training for in situ visualization of ionizing radiation measurements
(2022-08-01)Surveying an environment for sources of ionizing radiation requires the use of measurement tools and skills developed from training in order to understand and analyze measurements. Recent advances in technology allow for ... -
Non-linear model predictive control for autonomous vehicles
(2011-11-01)With the advent of faster computer processors and better optimization algorithms, Model Predictive Control (MPC) systems are more readily used for real-time applications. This research focuses on the application of MPC ...