Search
Now showing items 161-170 of 385
Influence of forced convection on sessile droplet evaporation
(2019-04-01)
Evaporation is a phase change process with potential for achieving large heat transfer rates under high air temperatures due to the latent heat of vaporization. Bioin-spired artificial perspiration systems can leverage the ...
Numerical investigation of turbulent combustion regimes on localized forced ignition using stratified combustible mixture
(2019-03-01)
Localized forced ignition of turbulent stratified mixtures has been numerically analyzed based on three- dimensional Direct Numerical Simulations (DNS) for different values of Karlovitz number (Ka) corresponding to different ...
Enhancing the effectiveness of Stirling engine regenerators
(2019-04-01)
A discrete heat transfer model is developed to determine which parameters influence the effectiveness of Stirling engine regenerators and quantify how they influence it. It is revealed that the regenerator thermal mass ...
Development and analysis of active rear axle steering for 8x8 combat vehicle
(2018-08-01)
This thesis proposes and compares multiple vehicle dynamics controllers using rear axle steering of an 8x8 combat vehicle. The controllers are assessed on ability to increase maneuverability at low speed, increase stability ...
Experimental investigation and evaluation of hybrid ammonia fuel options for power generators
(2018-04-01)
This research thesis aims to make use of ammonia as a possible fuel source for power generators by performing an experimental study on a gasoline generator with an ammonia based gasoline fuel blend. Then, the combustion ...
Partial separation of an azeotropic mixture of hydrogen chloride and water and copper (ii) chloride recovery for optimization of the copper-chlorine cycle
(2017-09-01)
An atmospheric-pressure distillation system is designed and constructed to partially separate hydrochloric acid and water. The system concentrates HCl(aq) between the electrolyzer and hydrolysis steps of the Copper-Chlorine ...
Tissue segmentation using medical image processing chain optimization
(2016-08-01)
Surveyed literature shows many segmentation algorithms using different types of optimization methods. These methods were used to minimize or maximize objective functions of entropy, similarity, clustering, contour, or ...
Modelling, inspection, and post-processing of layer-based additive manufacturing surfaces to maintain product quality
(2017-04-01)
Today’s Additive Manufacturing (AM) is mostly layer-based. Despite AM’s great capabilities in fabrication of complex geometries, product’s surface roughness is a limiting factor in many industrial applications. Therefore, ...
Investigation of copper deposition on steel in molten copper chloride
(2018-01-01)
Hydrogen is considered as the most prominent candidate for clean energy generation. The Copper Chloride (Cu-Cl) cycle has been chosen as an effective cycle for production of hydrogen due to its comparatively lower operating ...
Development and investigation of alkaline electrolyte based direct ammonia fuel cells
(2018-01-01)
In the present thesis study, alkaline electrolyte based direct ammonia fuel cells are developed, and their performances are evaluated through various parameters and efficiencies, such as open circuit voltages, polarization ...