Search
Now showing items 1-10 of 12
Design and analysis of the three degrees of freedom parallel kinematic machine
(2008-08-01)
The thesis is about design and analysis of a PKM with 3 DOF. The new PKM is designed as a machine tool in various applications in manufacturing. The PKM is optimized based on the developed stiffness model. Kinematics and ...
Process analysis and aspen plus simulation of nuclear-based hydrogen production with a copper-chlorine cycle
(2008-08-01)
Thermochemical processes for hydrogen production driven by nuclear energy are promising alternatives to existing technologies for large-scale commercial production of hydrogen, without dependence on fossil fuels. In the ...
Effects of blade configuration on flow distribution and power output of a zephyr vertical axis wind turbine.
(2008-07-01)
Worldwide interest in renewable energy systems has increased dramatically, due to environmental concerns like climate change and other factors. Wind power is a major source of sustainable energy, and can be harvested using ...
Multi-state system in a fault tree analsis of a nuclear based thermochemical hydrogen plant
(2008-07-01)
Nuclear-based hydrogen generation is a promising way to supply hydrogen for this large market in the future. This thesis focuses on one of the most promising methods, a thermochemical Cu-Cl cycle, which is currently under ...
Energy, exergy and cost analyses of nuclear-based hydrogen production via thermochemical water decomposition using a copper-chlorine (Cu-CI) cycle
(2008-04-01)
In this thesis the Copper-Chlorine (Cu-CI) thermochemical cycle and its components as well as operational and environmental conditions are defined, and a comprehensive thermodynamic analysis of a Cu-CI thermochemical cycle, ...
Analysis of hydrodynamic phenomena in a fluidized bed for thermochemical hydrogen production
(2008-04-01)
This thesis examines transport phenomena of cupric chloride (CuCI2) hydrolysis within a fluidized bed. Conversions of CuCi2 and steam as a fluidizing gas are numerically investigated using a new non-catalytic gas-solid ...
Thermodynamic analysis of molten carbonate fuel cell systems
(2008-12-01)
This study deals with the thermodynamic analysis of a molten carbonate fuel cell
(MCFC) hybrid system to determine its efficiencies, irreversibilities and performance.The analysis includes a performance investigation of ...
Optimization-based mechanism synthesis using multi-objective parallel asynchronous particle swarm optimization
(2008-12-01)
A distributed variant of multi-objective particle swarm optimization (MOPSO) called
multi-objective parallel asynchronous particle swarm optimization (MOPAPSO) is
presented, and the effects of distribution of objective ...
Modeling and vibration analysis of a rocking–mass gyroscope system
(2008-04-01)
Rocking-mass gyroscope consists of an assembly of four cantilever beams with a rigid mass attached to them in the middle subjected to base rotations. Due to the gyroscope effect, the beams undergo coupled flexural-torsional ...
Evaporative drying of cupric-chloride droplets in a thermo-chemical cycle of hydrogen production
(2008-04-01)
This thesis develops analytical and numerical solutions that predict behavior of Cupric-Chloride droplets undergoing spraying and drying processes. Cupric-Chloride (CuCl2) is present as molten salt and slurry within the ...