Search
Now showing items 11-20 of 32
Analysis and techniques of data compression in smart grids in the context of IEC 61850 communication protocol
(2020-02-01)
A smart grid is characterized by a two-way communication between the generation and the loads in addition to the distributed energy resources, which dictated the integration of smart monitoring devices to achieve full ...
Modeling and simulation of The CERTS Microgrid: a comparative study using PSCAD and MATLAB SIMSCAPE
(2020-04-01)
The legacy electric power system has grown in magnitude and complexity since its conception. This was a result of various advancements, such as the need to match the increase in power demand, and to address the shortage ...
Modeling, simulation, and design of hybrid EV-battery charger for optimum grid utilization
(2020-12-01)
The rapid recent development of electric vehicles (EVs) charging system, is changing the future of the transportation sector. Thanks to Photovoltaics solar energy (PV), the EV charging operating cost is reduced, and an ...
Development of a light-weight manipulator system for an omni-directional multi-rotor platform
(2020-10-01)
This thesis presents the development of a proof-of-concept physical prototype and control system for a six degree-of-freedom manipulator attached to an omni-directional multi-rotor system known as the OmniRaptor. This ...
Design, development and experimental validation of a lab-scale system for rapid rotational molding of functionally graded integral-skin cellular polyethylene composites
(2020-03-01)
An existing lab-scale experimental setup system, originally developed for a patented Rapid Rotational Foam Molding (RRFM) process, was re-designed, built, and its functionality was successfully experimentally verified. The ...
Tissue classification from electric impedance spectroscopy for haptic feedback in minimally invasive surgery
(2020-10-01)
Haptic feedback is missing in teleoperated surgical robots creating a sensory disconnect from the surgeon and their patient. This thesis proposes using the electric impedance of tissues, instead of the traditionally used ...
Design and evaluation of solar and geothermal energy systems integrated with Cu-Cl cycle
(2020-09-01)
This thesis study proposes solar and geothermal based three multigeneration systems. System 1 consists of a bifacial photovoltaic (BiPV) plant, multi-effect distillation (MED) desalination unit and, proton exchange membrane ...
Development of an integrated tracking control algorithm and a test platform for autonomous excavation
(2020-03-01)
Since construction is part of the industrial sector where a large amount of labor is required and workers operate under harsh environmental conditions, the transformation from manual to autonomous operation in modern ...
Combustion and emission characteristics of ammonia blended fuels in a spark-ignited engine
(2020-06-01)
Climate change and fossil fuel depletion has brought attention to the need for alternative fuels. Ammonia shows great potential as an alternative fuel because it is carbon-free and can be produced renewably. In this study ...
Effect of diameter ratios on the flow-sound interaction of the straight circular finned cylinders
(2020-01-01)
Finned tubes that are widely used in heat exchangers could be susceptible to the flow-excited acoustic resonance that generates intense pressure fluctuations, which may lead to premature fatigue failure of the tubes. This ...