Search
Now showing items 11-20 of 73
Conceptual design of a thermal hydraulic loop for multiple test geometries at supercritical conditions named supercritical phenomena experimental test apparatus (SPETA)
(2012-04-01)
The efficiency of nuclear reactors can be improved by increasing the operating pressure of current nuclear reactors. Current CANDU-type nuclear reactors use heavy water as coolant at an outlet pressure of up to 11.5 MPa. ...
Developing a framework for thermodynamic measurements of fluoride salt nuclear fuel
(2019-10-01)
With a single liquid acting simultaneously as a primary coolant and a nuclear fuel, molten salt reactor development has been challenged with understanding the behavior of its complex fluoride solution under various conditions. ...
Development and optimization of new generation start-up instrumentation systems (SUI) for domestic CANDU reactors
(2010-12-01)
Due to the age and operating experience of Bruce Power units, equipment ageing and obsolescence has become one of the main challenges that need to be resolved for all systems, structures and components in order to ensure ...
Study on linking a SuperCritical water-cooled nuclear reactor to a hydrogen production facility
(2011-07-01)
The SuperCritical Water-cooled nuclear Reactor (SCWR) is one of six Generation-IV nuclear-reactor concepts currently being designed. It will operate at pressures of 25 MPa and temperatures up to 625°C. These operating ...
Thermal aspects of high efficiency channel with conventional and alternative fuels in SuperCritical water-cooled reactor (SCWR) applications
(2011-03-01)
Chosen as one of six Generation‒IV nuclear-reactor concepts, SuperCritical Water-cooled Reactors (SCWRs) are expected to have high thermal efficiencies within the range of 45 ‒ 50% owing to reactor‘s high outlet temperatures. ...
Determining the effectiveness of nuclear security through computer simulation
(2015-09-01)
There is a growing concern from both national regulators and the International
Atomic Energy Agency (IAEA) about the threat posed by attacks against iconic targets such as nuclear power plants. This has led to an increased ...
The effect of high dose rate on tissue equivalent proportional counter measurements in mixed neutron-gamma fields
(2010-04-01)
Tissue equivalent proportional counters (TEPCs) are commonly used for radiation monitoring in areas where a mixture of neutron and photon radiations may be present, such as those commonly encountered in nuclear power plants. ...
Implementation of power electronics in nuclear power plants: DC electrical system conceptual design and its financial analysis
(2018-05-01)
A Power Electronic (PE) device is a semiconductor-based device which enable many advanced conversion of electricity which have been used widely in many industries. Due to the recent development in both circuit design and ...
Comparative assessment of small modular reactor Passive Safety System design via integration of dynamic methods of analyses
(2019-12-01)
Integral Pressurized Water Reactor (iPWR) type SMR designs were studied featuring Passive Safety Systems (PSS) in all cases. As many as 11 current SMR designs use PSS to remove decay heat. Variations in PSS designs were ...
Theoretical performance analysis of a novel hemispherical tissue equivalent proportional counter for neutron monitoring and dosimetry
(2016-02-01)
Neutron dosimetry in reactor fields is currently conducted using thermal neutron flux monitors. It has been demonstrated that Tissue Equivalent Proportional Counters (TEPCs) have the potential to improve the accuracy of ...