Search
Now showing items 21-30 of 49
Evaporative heat and mass transfer with solubility driven solidification of aqueous droplet flows
(2009-03-01)
Nuclear-based hydrogen production via thermochemical water decomposition using a copper-chlorine cycle consists of a series of chemical reactions that split water into hydrogen and oxygen. This is accomplished through ...
Performance assessment of transient behaviour of small wind turbines
(2009-08-01)
Small wind turbine installations have a variety of potential uses, each with unique
performance demands and operating conditions. Many applications require that the
turbine is placed in wind conditions that are not ideal ...
Advancing the technology development for better quality wood plastic composites: process ability study
(2009-03-01)
Wood Plastic Composites (WPC) have advantages over natural wood such as improved
stiffness, recyclability, and waste minimization. However, issues such as the difficulty of
processing WPC with conventional methods, volatile ...
Detecting and preventing the electronic transmission of illicit images
(2009-04-01)
The sexual exploitation of children remains a very serious problem and is rapidly increasing globally through the use of the Internet. This work focuses on the current methods employed by criminals to generate and distribute ...
Design and analysis of a three degrees of freedom (DOF) parallel manipulator with decoupled motions
(2009-04-01)
Parallel manipulators have been the subject of study of much robotic research during the past three decades. A parallel manipulator typically consists of a moving platform that is connected to a fixed base by at least two ...
Optimization-based mechanism synthesis using multi-objective parallel asynchronous particle swarm optimization
(2008-12-01)
A distributed variant of multi-objective particle swarm optimization (MOPSO) called
multi-objective parallel asynchronous particle swarm optimization (MOPAPSO) is
presented, and the effects of distribution of objective ...
Design and development of a novel omni-directional platform
(2009-08-01)
This thesis presents the design and development of a unique omni-directional platform
known as the Omnibot which was built in the Mechatronic and Robotic Systems
Laboratory at UOIT. The Omnibot's layout is novel because ...
Rapid rotational foam molding of integral skin polypropylene cellular composites
(2009-05-01)
Rapid Rotational Foam Molding (RRFM) is a novel patent-pending process that was
designed and developed to maximize the synergistic effects resulting from the deliberate
combination of extrusion and rotational foam molding ...
Development of a heat-transfer correlation for supercritical water in supercritical water-cooled reactor applications
(2009-12-01)
A large set of experimental data, obtained in Russia, was analyzed and a new heat-transfer correlation for supercritical water was developed. This experimental dataset was obtained within conditions similar to those for ...
Design and analysis of the three degrees of freedom parallel kinematic machine
(2008-08-01)
The thesis is about design and analysis of a PKM with 3 DOF. The new PKM is designed as a machine tool in various applications in manufacturing. The PKM is optimized based on the developed stiffness model. Kinematics and ...