Search
Now showing items 21-30 of 48
Thermodynamic performance evaluation and experimental study of a Marnoch Heat Engine
(2009-10-01)
The Marnoch Heat Engine (MHE) is a recently patented type of new heat engine that
produces electricity from lower temperature heat sources. The MHE utilizes lower
temperature differences to generate electricity than any ...
Multi-state system in a fault tree analsis of a nuclear based thermochemical hydrogen plant
(2008-07-01)
Nuclear-based hydrogen generation is a promising way to supply hydrogen for this large market in the future. This thesis focuses on one of the most promising methods, a thermochemical Cu-Cl cycle, which is currently under ...
Design of 3-DOF parallel manipulators for micro-motion applications
(2009-08-01)
This thesis presents two unique micro-motion parallel kinematic manipulators (PKM):
a three degrees of freedom (3-DOF) micro-motion manipulator and a 3-DOF micro-motion
manipulator with actuation redundancy. The 3-DOF ...
Thermal performance analysis and geometrical optimization of automotive brake rotors.
(2008-07-01)
The heat dissipation and thermal performance of ventilated brake discs strongly depends on the aerodynamic characteristics of the air flow through the rotor passages. In this thesis, the thermal convection is analyzed using ...
Evaporative heat and mass transfer with solubility driven solidification of aqueous droplet flows
(2009-03-01)
Nuclear-based hydrogen production via thermochemical water decomposition using a copper-chlorine cycle consists of a series of chemical reactions that split water into hydrogen and oxygen. This is accomplished through ...
Research on remote control of reconfigurable modular robotic system
(2009-08-01)
Serial manipulators, which have large work space with respect to their own volume
and occupied floor space, are the most common industrial robots by far. However, in
many environments the situation is unstructured and less ...
Advancing the technology development for better quality wood plastic composites: process ability study
(2009-03-01)
Wood Plastic Composites (WPC) have advantages over natural wood such as improved
stiffness, recyclability, and waste minimization. However, issues such as the difficulty of
processing WPC with conventional methods, volatile ...
Design and analysis of a three degrees of freedom (DOF) parallel manipulator with decoupled motions
(2009-04-01)
Parallel manipulators have been the subject of study of much robotic research during the past three decades. A parallel manipulator typically consists of a moving platform that is connected to a fixed base by at least two ...
Optimization-based mechanism synthesis using multi-objective parallel asynchronous particle swarm optimization
(2008-12-01)
A distributed variant of multi-objective particle swarm optimization (MOPSO) called
multi-objective parallel asynchronous particle swarm optimization (MOPAPSO) is
presented, and the effects of distribution of objective ...
Rapid rotational foam molding of polyethylene integral-skin foamed core moldings
(2009-06-01)
This thesis focuses on the design, development, and evolution of a novel patent-pending
plastic processing technology entitled “Rapid Rotational Foam Molding” with special
emphasis on the processing of polyethylene (PE) ...