Browsing Master Theses & Projects by Title
Now showing items 321-340 of 463
-
Modeling and simulation of The CERTS Microgrid: a comparative study using PSCAD and MATLAB SIMSCAPE
(2020-04-01)The legacy electric power system has grown in magnitude and complexity since its conception. This was a result of various advancements, such as the need to match the increase in power demand, and to address the shortage ... -
Modeling and vibration analysis of a rocking–mass gyroscope system
(2008-04-01)Rocking-mass gyroscope consists of an assembly of four cantilever beams with a rigid mass attached to them in the middle subjected to base rotations. Due to the gyroscope effect, the beams undergo coupled flexural-torsional ... -
Modeling of voltage source converter based HVDC transmission system in EMTP-RV
(2010-08-01)Voltage Source Converter (VSC) applications include but are not limited to HVDC, Flexible AC Transmission System (FACTS) devices such as STATCOM, SSSC, UPFC and Wind generators and active filters. The VSC based HVDC system ... -
Modeling, design, control and validation of a multiple-input DC-DC converter topology for effective renewable energy management
(2019-04-01)Multiple-input power converters are receiving significant research attention as they offer several advantages over conventional converters, specifically their ability to interface multiple energy sources of various kinds. ... -
Modeling, simulation, and design of hybrid EV-battery charger for optimum grid utilization
(2020-12-01)The rapid recent development of electric vehicles (EVs) charging system, is changing the future of the transportation sector. Thanks to Photovoltaics solar energy (PV), the EV charging operating cost is reduced, and an ... -
Modelling and prediction of tire-rim slip with finite element analysis
(2023-07-01)In this thesis, tire-rim slip was simulated with a FEA model of a RHD truck tire. Multiple simulations were conducted to validate the model and investigate the effects of different parameters such as terrain type, tire-rim ... -
Modelling and real-time simulation of a modular bidirectional solid-state transformer for ultra-fast charging of electric vehicles
(2021-08-01)This thesis proposes a modular Solid-State Transformer (SST) system architecture to be directly interfacing with a three-phase MV utility network enabling high-power and ultra-fast charging capabilities for electric vehicles, ... -
Modelling and validation of agricultural tire-terrain interaction
(2020-12-01)The use of Finite Element Analysis (FEA) and simulation software has been extensively used for many engineering applications. More precisely, computerized methods have paved way for accurately simulating tire-terrain ... -
Modelling, inspection, and post-processing of layer-based additive manufacturing surfaces to maintain product quality
(2017-04-01)Today’s Additive Manufacturing (AM) is mostly layer-based. Despite AM’s great capabilities in fabrication of complex geometries, product’s surface roughness is a limiting factor in many industrial applications. Therefore, ... -
A monitoring framework for side-channel information leaks
(2019-04-01)Security and privacy in computer systems is becoming an ever important field of study as the information available on these systems is of ever increasing value. The state of research on direct security attacks to computer ... -
Monte-Carlo-simulation-based performance analysis of the heat transfer process in nuclear-based hydrogen production based on Cu-Cl Cycle.
(2014-08-01)As a crucial step in nuclear-based hydrogen production based on Cu-Cl cycle, the performance analysis of heat transfer process is of paramount importance. However, as a newly built system, the major obstacle of applying ... -
Motion planning for multi-link robots with artificial potential fields and modified simulated annealing
(2010-12-01)In this thesis we present a hybrid control methodology using Artificial Potential Fields (APF) integrated with a modified Simulated Annealing (SA) optimization algorithm for motion planning of a multi-link robots team. The ... -
Multi-antenna relay network beamforming design for multiuser peer-to-peer communications.
(2014-08-01)In this work, we consider a multi-user peer-to-peer relay network with multiple multiantenna relays which employ amplify-and-forward relaying protocol. Assuming distributed relay beamforming strategy, we investigate the ... -
Multi-state system in a fault tree analsis of a nuclear based thermochemical hydrogen plant
(2008-07-01)Nuclear-based hydrogen generation is a promising way to supply hydrogen for this large market in the future. This thesis focuses on one of the most promising methods, a thermochemical Cu-Cl cycle, which is currently under ... -
Multimodal series elastic actuator for human-machine interaction with applications in robot-aided rehabilitation
(2019-11-01)Series elastic actuators (SEAs) are becoming an elemental building block in collaborative robotic systems. They introduce an elastic element between the mechanical drive and the end-effector, making otherwise rigid structures ... -
Non-linear model predictive control for autonomous vehicles
(2011-11-01)With the advent of faster computer processors and better optimization algorithms, Model Predictive Control (MPC) systems are more readily used for real-time applications. This research focuses on the application of MPC ... -
Nonlinear vibration analysis of viscoelastic plates with fractional damping
(2017-06-01)Fractional calculus has the history as long as the classical calculus, but up to recent years, less attention has been paid to this method due to its complexity and difficulties in dealing with fractional derivatives and ... -
Nonlinear vibration and chaotic motion of uniform and non-uniform carbon nanotube resonators.
(2014-07-01)Vibration analysis of carbon nanotubes (CNTs) is very essential field owing to their many promising applications in tiny instruments. The unique and interesting properties of CNTs, particularly their mechanical and electrical ... -
Nonlinear vibration and frequency response analysis of piezoelectric-based nanotube resonators
(2015-04-01)To study the vibration behaviour of nanotube-based structures, different models of nanotubes under the effects of piezoelectric layer, intermediate mass, fluid flow and structure curvature are developed. The frequency ... -
A novel deep learning architecture and large-scale benchmark for robust object detection in traffic surveillance and analysis
(2022-12-01)Upstream technologies such as traffic surveillance provide helpful information to downstream intelligent transportation systems intending to improve the safety, mobility, and efficiency of road-users whilst reducing their ...